US Robotics ADSL 4-Port Router Installation Guide download pdf (Page 13)

Troubleshooting

To help diagnose a problem, first use the following troubleshooting checklist.

1. Confirm that you are using the AC power adapter that came with your router and

that it is connected to the router and to an active wall outlet. Make sure the

Power switch is switched to the on position. The LED should be lighted.

2. Confirm that you have securely connected the telephone cable to the telephone

wall jack and to the router. The LED should be lighted if you have correctly

configured DSL.

3. Confirm that you have secured the Ethernet cable(s) to the computer’s network

interface card and to the Ethernet port(s) on the router (labelled 1, 2, 3, or 4).

The corresponding LED should be lighted on the front of the router.

For more information on the LEDs, see the Status LEDs section earler in this document.

Opening the Web User Interface

The Web User Interface will be your main tool for configuring, troubleshooting and

monitoring the router. Follow this procedure to access it.

1. Start a Web browser.

2. Open the page http://192.168.1.1

3. A login window will appear:

Enter a user name and password and click OK. The default user name and password

are both admin.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 119 120

No comments

US Robotics ADSL 4-Port Router Installation Guide Page 13