US Robotics ADSL 4-Port Router Installation Guide download pdf (Page 5)

ADSL 4-Port Router Installation

Thank you for purchasing the USRobotics ADSL 4-Port Router.

For current product support and contact information, go to the following Web site:

http://www.usr.com/support

NOTE: It is important that you have your serial number written down for future

reference. If you ever need to call our technical support department, you will

need this number to receive assistance. You can find your serial number on a bar

code sticker located on the bottom of the router and also on the box. You will also

need your model number. It is noted below.

Write your serial number in the space provided below.

What You Need Before You Begin

You will need active ADSL and Internet service from your local telephone company or

Internet Service Provider (ISP) before you can go on the Internet. You may also need the

following from your ISP:

• VPI/VCI values

• ADSL standard (modulation)

• Encapsulation mode

• Authentication (PAP or CHAP) for PPP connections

• Your user name and password, if they were assigned by your ISP.

Router Installation

Step 1. Connect Microfilter (if included or required by your ISP)

A microfilter removes interference between voice and DSL signals. Your ISP will determine

if a microfilter is necessary. If a microfilter was not included with the router, you may want

to ask your ISP if you need to purchase one or more.

To install a microfilter, plug a device (phone, fax machine, or other telephony device) into

the microfilter, and then plug the microfilter into the telephone wall jack. Do not install a

9107

Serial Number Model Number

1 2 3 4 5 6 7 8 9 10 ... 119 120

No comments

US Robotics ADSL 4-Port Router Installation Guide Page 5