US Robotics USR8700 User's Guide download pdf (Page 24)

Serial ATA 4-Drive NAS

User Guide

Getting Started - 22

5. Select the configuration that you chose from the table on page 12 and click Next.

By default, the storage system selects the configuration that provides the best level of data protection

available: for a single disk, a linear configuration; for two disks, RAID 1; and for three or four disks,

RAID 5.

If you want to change the disk configuration, select the desired RAID level and then click Next.

If you want to add or remove hard disks, do so one at a time. For each disk, wait until the Disk LED is

blue and click Scan. When you are finished adding disks, select your configuration and click Next.

When you click Next, the Disks to Back Up screen appears:

6. In Number of disks to back up, select the total number of disks that you plan to back up to this stor-

age system. The maximum number of disks you can back up is 25.

If you do not plan to back up any disks, select 0, click Next, and go to step 9.

If you leave this field blank, 70% of your storage space will be allocated for backups, and 30% will be

allocated for shared folders.

If some computers have multiple disks, be sure to select the total number of disks that you plan to back

up. For example, if your network has five computers and each computer has two hard disks, you

should select 10.

When you select a number, a corresponding number of text boxes (Disk 1, Disk 2, etc.) appear in

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 155 156

No comments

US Robotics USR8700 User's Guide Page 24